AUT Journal of Modeling and Simulation

AUT Journal of Modeling and Simulation

A Tunable Narrowband Terahertz Bandpass Filter Based on Graphene Plasmonic Resonators

Document Type : Research Article

Authors
1 blv nokhbegan 4
2 Teheran
10.22060/miscj.2026.27171.5561
Abstract
Half-wave graphene plasmonic resonators provide deep-subwavelength dimensions and electrical tunability at terahertz frequencies, but their higher-order resonances may create unwanted transmission bands. This work presents a two-pole, narrowband graphene bandpass filter that functionally separates second-harmonic suppression from adjustment of the fundamental-band external coupling. Each resonator is tapped near the voltage node of its second-order mode, while a short, high-impedance quarter-wave graphene section provides the external coupling required at the fundamental without moving the tap away from this node. A quasi-static plasmonic formulation and a calibrated even/odd transmission-line circuit guide the design; three-dimensional frequency-domain CST simulations assess the resulting filter. At μc = 0.53 eV and τ = 2.5 ps, the nominal filter has a 15-dB return-loss passband of 4.947–5.245 THz (approximately 5.8%), a minimum insertion loss of 1.86 dB, and a maximum S21 of −31.44 dB within the specified 8.5–11.0 THz second-harmonic window. The 15-dB matched-band group delay ranges from 1.019 to 1.196 ps (0.177-ps peak-to-peak variation). A controlled seven-position tap sweep supports the predicted modal-coupling mechanism, and separate relaxation-time and small tap-position sweeps quantify material-loss and geometric sensitivities. Reducing μc to 0.20 eV shifts the transmission peak to 3.202 THz (a 1.60:1 frequency ratio). These findings establish a compact and tunable numerical design while identifying the material-quality, biasing, and patterning limitations that remain for experimental realization.
Keywords
Subjects


Articles in Press, Accepted Manuscript
Available Online from 21 November 2026